Hot-Plug Hard Drives
CAUTION: To reduce the risk of data loss, remove a hot-plug drive only when the drive LED is
amber. Do not remove a hot-plug drive if the online LED is green.
Ultra2 Hard Drives
1. Open the front bezel door.
2. Press the release tab and open the locking lever that holds the drive in place.
3. Pull the drive from the cage .
Figure 2-11. Removing a hot-plug hard drive
Reverse steps 1 through 3 to replace a hot-plug hard drive.
3
For use with Pentium II and Pentium III Xeon processor-based servers only
Removal and Replacement Procedures 2-17
1
2