Rack Warnings - Compaq 5500R - ProLiant - 256 MB RAM Maintenance And Service Manual

2-4 Compaq ProLiant 5500 and 5500R Maintenance and Service Guide
WARNING: To reduce the risk of electric shock or damage to the equipment:
I
I
I
I
I
CAUTION: Electrostatic discharge can damage electronic components. Be sure you are
properly grounded before beginning any installation procedure. Refer to the section titled
"Electrostatic Discharge" for more information.

Rack Warnings

WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that:
I
I
I
I
I
I
I
WARNING: To reduce the risk of personal injury, fire, or damage to the equipment, do not
overload the AC supply branch circuit that provides power to the rack.
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Install the power supply before connecting the power cord to the power supply.
Unplug the power cord before removing the power supply from the server.
If the system has multiple power supplies, disconnect power from the system by
unplugging all power cords from the power supplies.
The leveling jacks are extended to the floor
The full weight of the rack rests on the leveling jacks
The stabilizers are attached to the rack and are fully extended if it is a single rack
installation
Multiple racks are coupled together in multiple-rack installations
No more than one component is extended at a time
The heaviest item is loaded first and at the bottom of the rack
The equipment is properly supported/braced when installing options and cards
For use with Pentium II and Pentium III Xeon processor-based servers only