Storage Fault Recovery Tracking; Storage Automatic Reconstruction; Network Interface Fault Recovery Tracking; Memory Fault Recovery Tracking - Compaq 5500R - ProLiant - 256 MB RAM Maintenance And Service Manual

3-64 Compaq ProLiant 5500 and 5500R Maintenance and Service Guide

Storage Fault Recovery Tracking

This feature tracks over 12 failure-indication parameters, such as time-outs, spin-up, and self-
test errors of SCSI drives. You can use these parameters to pinpoint failed storage subsystem
components and to recover from controller or hard drive failure.

Storage Automatic Reconstruction

This feature automatically reconstructs data to an online spare or to a replaced drive if a drive
fails. To use the reconstruction feature, you must configure the server for drive mirroring or data
guarding. The reconstruction decreases system downtime by allowing rapid recovery to full
system operation if a drive fails.

Network Interface Fault Recovery Tracking

This feature tracks over 20 failure indication parameters, such as alignment errors, lost frames,
and frame copy errors of Ethernet and Token Ring network interfaces. It decreases network
downtime by enabling diagnosis of actual network interface failures.

Memory Fault Recovery Tracking

This feature inspects the operation of the memory subsystem looking for uncorrectable memory
errors.
For use with Pentium II and Pentium III Xeon processor-based servers only