Peripheral Board Configuration Switches - Compaq 5500R - ProLiant - 256 MB RAM Maintenance And Service Manual

Peripheral Board Configuration Switches

The Compaq ProLiant 5500 and 5500R Peripheral Board configuration switches are shown
below. See Table 4-6 for switch positions.
1 2 3 4 5 6
Figure 4-6. Peripheral board switches
Switch
1 Video
2 Lock Configuration
3 Rack Mount
4 Diskette Override
5 Password Enable
6 Maintenance
Peripheral Board Switches
Open (Off) Default Position
Enable integrated video
Configuration can be changed
System is tower configuration
Diskette boot is controlled by configuration
Power-on password is enabled
NV RAM is valid
For use with Pentium II and Pentium III Xeon processor-based servers only
Connectors, Switches, LEDs, and Jumpers 4-7
Table 4-6
Closed (On) Position
Disable integrated video
Configuration can not be changed
System is rack mount configuration
Diskette drive is enabled for booting
regardless of configuration
Power-on password is disabled
NV RAM is invalidated, configuration is lost