Table of Contents
Advertisement
Previewing the Pattern
a
Touch
.
An image of the pattern as it will be embroidered
appears.
b
Touch
the preview.
*
Frames displayed in gray cannot be selected.
*
Touch
to enlarge the image of the pattern.
*
The pattern can be embroidered as it appears in the
display.
c
Touch
to check the embroidering order.
The stitch simulator screen appears.
1
1 Simulation speed keys
2 Operation keys
: Start the simulation at the set speed.
: Pause the simulation.
: Stop the simulation.
to select the frame used in
2
*
Touch
to return to the embroidery frame
selection screen.
d
Touch
.
Changing the Size and the Density of the
Pattern
If
is selected, you can change the pattern size while
maintaining the thread density. The machine recalculates the
stitch density automatically. With this function, the pattern
will be enlarged or reduced at a larger ratio than with normal
pattern resizing.
a
Touch
, and then touch
b
Select
in the size window.
*
: Change the pattern size while maintaining
the number of stitches. Enlarged patterns will be less
dense, and reduced patterns will be more dense. In
order to maintain embroidering quality, there is a
limit to how much the embroidery pattern can be
enlarged or reduced.
*
: Change the pattern size while maintaining
the thread density. After the pattern size is changed,
the thread density can be changed in the edit screen.
The number of stitches is recalculated depending on
the pattern size.
Memo
• This function cannot be used with alphabet
character patterns, frame patterns, repeated
patterns or buttonhole patterns.
• Patterns with a large number of stitches (100,001
or more) cannot be resized while maintaining a
thread density.
• You can also change the size by dragging the red
point at the sides and corners of the pattern.
EDITING PATTERNS
2
.
41
Advertisement
Table of Contents
