Router; Figure 85: T1600 Router Lcc-Cb - Juniper TX MATRIX PLUS Hardware Manual

TX Matrix Plus Router Hardware Guide
Related
Documentation
Upgrading the Junos OS on an Operational T1600 Router and TX Matrix Plus Router
206
NOTE: The description for the RE-C1800, part number
before the Junos OS Release 10.3 , and
RE
Release 10.3 and later.

Figure 85: T1600 Router LCC-CB

Overview of Upgrading and Integrating an Operational T1600 Router on page 201
Upgrading the Junos OS on an Operational T1600 Router and TX Matrix Plus Router
on page 206
Upgrading and integrating an operational T1600 router requires the following:
Junos OS Release 10.1 or later
The TX Matrix Plus router and T1600 router must each contain two host subsystems.
All host subsystems must be running the same Junos OS Release. This is a requirement
for graceful switchover. Graceful switchover must be enabled to integrate an operational
T1600 router. For information about graceful switchover, see the Junos OS High
Availability Configuration Guide.
To upgrade the software, you use CLI commands to copy a set of software images over
the network to memory storage on the Routing Engine. The Junos OS set consists of
740-026941
for Junos OS
RE-DUO-1800
Copyright © 2010, Juniper Networks, Inc.
, is
LCC