TX Matrix Hardware Guide
56
See "Connecting to a Management Console or Auxiliary Device" on page 119.
Connect the TX Matrix router to power, and power on the router.
10.
See "Overview of Providing Power to the TX Matrix Router" on page 125.
Test and connect the TX Matrix router fiber-optic components
11.
See "Overview of Testing and Connecting TX Matrix Fiber-Optic Components" on
page 133.
Perform the initial system startup.
12.
See "Performing the Initial Software Configuration for the TX Matrix Router" on page 142.
Convert and integrate the T640 routers into the routing matrix.
13.
See "Overview of Converting and Integrating a T640 Router" on page 159.
Verify the state of the TX Matrix and T640 routers
14.
See "Verifying the State of the Routing Matrix" on page 186.
For each T640 router, configure specific LCC chassis features for the PICs.
15.
See "Configuring Specific LCC Chassis Features for the T640 Router" on page 154.
Copyright © 2010, Juniper Networks, Inc.