Juniper TX MATRIX Hardware Manual page 210

TX Matrix Hardware Guide
Related
Documentation
178
If graceful switchover is enabled on the T640 router, disable it on the master Routing
3.
Engine before rebooting the Routing Engines:
user@host> show configuration chassis redundancy graceful-switchover
traceoptions {
flag update;
}
enable;
user@host# set chassis redundancy graceful-switchover disable
For more information about graceful switchover, see the Junos OS System Basics
Configuration Guide.
Issue the commit synchronize
4.
errors:
user@host# commit synchronize
On an external management device connected to the console or auxiliary port of
5.
, reboot the corresponding Routing Engine in the T640 router:
T640-CIP-0
user@host> request system reboot
On an external management device connected to the console or auxiliary port of
6.
T640-CIP-1 , reboot the corresponding Routing Engine in the T640 router:
user@host> request system reboot
On an external management device connected to the console or auxiliary port of
7.
, reboot the corresponding Routing Engine in the TX Matrix router:
TX-CIP-0
user@host> request system reboot
On an external management device connected to the console or auxiliary port of
8.
, reboot the corresponding Routing Engine in the TX Matrix router:
TX-CIP-1
user@host> request system reboot
Switching Plane Connections Between the TX Matrix Router and T640 Routers on
page 14
TX Matrix Fiber-Optic Array Cable Considerations on page 65
Overview of Integrating an Operational T640 Router with the TX Matrix Router on
page 169
command and ensure that there are no synchronization
Copyright © 2010, Juniper Networks, Inc.