Mt-Rj Connector - Cisco 6503 - Catalyst Firewall Security Sys Installation Manual
Installation guide
Hide thumbs
Also See for 6503 - Catalyst Firewall Security Sys:
- White paper (19 pages) ,
- Product bulletin (6 pages) ,
- Supplementary manual (3 pages)
Table of Contents
Advertisement
Appendix B
Transceivers, Module Connectors, and Cable Specifications
Module Connectors
MT-RJ Connector
The MT-RJ connector is a small form-factor fiber-optic connector used to connect modules to a SMF or
MMF optical network. (See
Figure
B-16.) The small size of the MT-RJ connector, as compared with the
SC connector, allows for a greater port density on the modules. The MT-RJ connector is a two-fiber
connector (transmit and receive) and has a form factor and clip lock retainer similar to the RJ-45 copper
connector.
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
Warning
beams or view directly with optical instruments. Statement 1051
Make sure that the optical connectors are clean before making the connections. Contaminated connectors
Note
can damage the fiber and cause data errors. For information on cleaning the optical connectors, see the
"Cleaning the Fiber-Optic Connectors" section on page
B-38.
Figure B-16
MT-RJ Connector
Catalyst 6500 Series Switches Installation Guide
B-29
OL-5781-08
Advertisement
Table of Contents
Troubleshooting
