Cisco 6503 - Catalyst Firewall Security Sys Installation Manual page 126

Chassis Installation Kits and Cable Guides
Table 3-2
Chassis
Catalyst 6506 and
Catalyst 6506-E
Catalyst 6509 and
Catalyst 6509-E
Catalyst 6509-NEB
Catalyst 6500 Series Switches Installation Guide
3-6
Chassis Installation Kits and Cable Guides (continued)
Installation Kits and Cable Guides
Standard 19-inch rack-mount L brackets (factory-installed on the
•
chassis). Associated rack-mounting hardware is included in the
accessory kit.
• 3 RU rack-mount shelf kit is included in the accessory kit.
Two 6-slot cable management guides are included in the accessory
•
kit.
• Catalyst 6506-E only—Rubber feet installation kit is included in
the accessory kit. (The kit is used when installing the chassis as a
freestanding unit on a table or shelf.)
An optional center rack-mount kit for 23-inch, telco-style racks
Note
is available for both of these chassis. The kit is not included as
part of the standard accessory kit, but is available as a
separately orderable item (WS-C6597=). Installation
instructions are included with the kit.
Standard 19-inch rack-mount L brackets (factory-installed on the
•
chassis). Associated rack-mounting hardware is included in the
accessory kit.
• 3 RU rack-mount shelf kit is included in the accessory kit.
• Two 9-slot cable management guides are included in the accessory
kit.
• Catalyst 6509-E only—Rubber feet installation kit is included in
the accessory kit. (The kit is used when installing the chassis as a
freestanding unit on a table or shelf.)
An optional center rack-mount kit for 23-inch, telco-style racks
Note
is available for both of these chassis. The kit is not included as
part of the standard accessory kit, but is available as a
separately orderable item (WS-C6597=). Installation
instructions are included with the kit.
Standard 19-inch rack-mount L brackets (factory-installed on the
•
chassis). Associated rack-mounting hardware is included in the
accessory kit.
• 3 RU rack-mount shelf kit is included in the accessory kit.
Stabilizer bracket installation kit is included in the accessory kit.
•
(The kit is required when installing the chassis as a freestanding
unit.)
One cable management guide is included in the accessory kit.
•
Chapter 3 Installing the Switch
OL-5781-08