6000 W Power Supply Ac Power Cords - Cisco 6503 - Catalyst Firewall Security Sys Installation Manual

Installation guide
Hide thumbs Also See for 6503 - Catalyst Firewall Security Sys:
Table of Contents

Advertisement

Appendix A
Power Supply Specifications
Table A-35
LED
INPUT OK 1, INPUT OK 2
(AC-input power supply
only)
INPUT OK 1, INPUT OK 2,
INPUT OK 3, and INPUT
OK 4
(DC-input power supply
only)
FAN OK
OUTPUT FAIL

6000 W Power Supply AC Power Cords

Table A-36
power supply. Included in the table are references to illustrations of the power cords.
Table A-36
6000 W Power Supply AC Power Cords
Locale
Argentina
Australia, New Zealand
People's Republic of China CAB-AC16A-CH=
Continental Europe
International
Israel
Italy
OL-5781-08
6000 W AC-Input and DC-Input Power Supply LEDs
Meaning
Note
lists the specifications for the AC power cords that are available for the 6000 W AC-input
Power Cord
Part Number
CAB-7513ACR= or
CAB-IR2073-C19-AR=
CAB-AC-16A-AUS=
CAB-AC-2500W-EU=
CAB-AC-2500W-INT=
CAB-AC-2500W-ISRL=
CAB-7513ACI=
Green—Source voltage is OK. Input voltage is 85 VAC or greater.
Off—Source AC voltage falls below 70 VAC, is not present, or the
power supply is turned off.
Green—Source DC voltage is greater than or equal to –40.5 VDC.
Off—Source DC voltage is less than or equal to –37.5 VDC.
Green, off, or flashing—Source DC voltage is between –37.5 and
–40.5 VDC.
Green—Power supply fan is operating properly.
Off—Power supply fan failure is detected.
Red—Problem with one or more of the DC-output voltages of the
power supply.
Off—DC-output voltages within acceptable margins.
For proper operation of the OUTPUT FAIL LED, systems with
single power supplies must be configured with a minimum of
one fan tray and one supervisor engine. Systems with dual power
supplies must have a minimum configuration of one fan tray, one
supervisor engine, and one additional module. Failure to meet
these minimum configuration requirements can cause a false
power supply output fail signal.
AC Source Plug Type
Cordset Rating
IRAM 2073
16 A, 250 VAC
AU20S3
16 A, 250 VAC
GB16C
16 A, 250 VAC
CEE 7/7
16 A, 250 VAC
IEC 309
16 A, 250 VAC
SI16S3
16 A, 250 VAC
CEI 23-16/7
16 A, 250 VAC
Catalyst 6500 Series Switches Installation Guide
6000 W AC-Input and DC-Input Power Supplies
Power Cord
Reference
Illustration
Figure A-31
Figure A-46
Figure A-37
Figure A-41
Figure A-42
Figure A-34
Figure A-35
A-53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 6500 series

Table of Contents