Cisco 6503 - Catalyst Firewall Security Sys Installation Manual page 401

Appendix B Transceivers, Module Connectors, and Cable Specifications
Table B-16 X2 Transceiver Optical Transmit and Receive Specifications (continued)
X2 Transceiver Product
Number
X2-10GB-LX4
X2-10GB-LRM
1. The launch power shall be the lesser of the class 1 safety limit or the maximum receive power. Class 1 laser requirements are defined by IEC 60825-1:
2001.
2. Both the average and the OMA specifications must be met simultaneously.
X2 transceivers are required for use on the WS-X6708-10GE and the WS-X6716-10GE 10-Gigabit
Ethernet modules. Not all X2 transceiver types are supported unconditionally by these two modules; the
following caveats apply:
•
•
•
•
•
•
OL-5781-08
Transceiver Type
Transmit Power (dBm)
10GBASE-LX4 –0.5 per lane
WWWDM (maximum)
1300-nm MMF
–6.75 (minimum) per
lane
10GBASE-LRM 0.5 (maximum)
1310-nm
–6.5 (minimum)
X2-10GB-CX4—10GBASE for CX4 (copper) cable. No restrictions for use. The Cisco
X2-10GB-CX4 transceiver supports link lengths of up to 49.2 feet (15 m) on CX4 cable. Cisco
offers four CX4 cables: CAB-INF-28G-1= (1 meter cable), CAB-INF-28G-5= (5 meter cable),
CAB-INF-28G-10= (10 meter cable), and CAB-INF-26G-15= (15 meter cable).
X2-10GB-ER—10GBASE-ER serial 1550-nm extended-reach, single-mode fiber (SMF),
dispersion-shifted fiber (DSF). X2-10GB-ER transceivers labeled with a serial number that ends in
-02 do not provide EMI compliance when they are installed in the WS-X6716-10GE module. (See
Figure B-8 for the serial number location.)
X2-10GB-LR—10GBASE-LR serial 1310-nm long-reach, single-mode fiber (SMF),
dispersion-shifted fiber (DSF). X2-10GB-LR transceivers labeled with a serial number that ends in
-02 do not provide EMI compliance when they are installed in the WS-X6716-10GE module. (See
Figure B-8 for the serial number location.)
X2-10GB-LRM—10GBASE-LRM for FDDI-grade multimode fiber (MMF). The X2-10GB-LRM
is not supported by the show idprom command.
X2-10GB-LX4—10GBASE-LX4 serial 1310-nm multimode fiber (MMF). X2-10GB-LX4
transceivers that are labeled with a serial number that ends with -01, -02, or -03 do not provide EMI
compliance when they are installed in the WS-X6716-10GE. (See
location.)
X2-10GB-SR—10GBASE-SR serial 850-nm short-reach multimode fiber (MMF). No restrictions
for use.
Transmit and Receive
Receive Power (dBm) Wavelength (nm)
–0.5 (maximum) Four lanes; overall
range: 1269 to 1356
–14.4 per lane
0.5 (maximum) 1260 to 1355
–8.4 (minimum) (in
average)
–6.4 (minimum) in
2
OMA)
Figure B-8
Catalyst 6500 Series Switches Installation Guide
Pluggable Transceivers
for the serial number
B-15