Cisco 6503 - Catalyst Firewall Security Sys Installation Manual page 42

Catalyst 6506 Switch
Table 1-8
Table 1-8 Catalyst 6506 Switch Specifications
Item
Environmental
Temperature, operating
Temperature, nonoperating
and storage
Thermal transition
Humidity (RH), ambient
(noncondensing) operating
Humidity (RH), ambient
(noncondensing)
nonoperating and storage
Altitude, operating
Shock and vibration
Acoustic noise
Catalyst 6500 Series Switches Installation Guide
1-22
lists the environmental and physical specifications of the Catalyst 6506 switch chassis.
Specification
Certified for operation: 32° to 104°F (0° to 40°C)
Designed and tested for operation: 32° to 130°F (0° to 55°C)
The Catalyst 6500 series switches are equipped with internal air
Note
temperature sensors that are triggered at 104°F (40°C) generating a
minor alarm and at 131°F (55°C) generating a major alarm.
Chassis unpackaged: –4° to 149°F (–20° to 65°C)
Chassis in protective shipping package: –40° to 158°F (–40° to 70°C)
0.5°C per minute (hot to cold)
0.33°C per minute (cold to hot)
5% to 90%
5% to 95%
Certified for operation: 0 to 6500 ft (0 to 2000 m)
Designed and tested for operation: –200 to 10,000 ft (–60 to 3000 m)
This switch complies with Network Equipment Building Systems (NEBS)
(Zone 4 per GR-63-Core) in the following areas:
• Earthquake environment and criteria
Office vibration and criteria
•
Transportation vibration and criteria
•
Shock
Operational—5 G 30 ms, half-sine (IEC 68-2-27)
•
Nonoperational—20 G, 7.5 ms, trapezoidal
•
Vibration
Operational—3 Hz to 500 Hz.
Power Spectral Density (PSD)—0.0005 G
5 dB/octave roll off at each end. 0.5 hours per axis (1.12 Grms).
53 to 61 dB. International Organization for Standardization (ISO) 7779:
Bystander position operating to an ambient temperature of 86°F (30°C).
Chapter 1
2
/Hz at 10 Hz and 200 Hz.
Product Overview
OL-5781-08