Cisco 6503 - Catalyst Firewall Security Sys Installation Manual page 360

6000 W AC-Input and DC-Input Power Supplies
Table A-34
Specification
Power supply output
DC input terminal block
Output holdup time
Weight
Table A-35
Catalyst 6500 Series Switches Installation Guide
A-52
6000 W DC-Input Power Supply Specifications (continued)
Description
The 6000 W DC-input power supply can operate at either 2800 W,
4500 W, or 6000 W depending on the number of source DC power
cables attached.
Note
2800 W operation (two DC inputs)
•
–
–
–
• 4500 W operation (three DC inputs)
–
–
–
6000 W operation (four DC inputs)
•
–
–
–
Accepts 2-hole copper compression-type lugs.
•
Note
Terminal posts accept 1/4-inch-20 hex nuts.
•
20 ms minimum
35 lbs (16 kg)
list the 6000 W AC-input and DC-input power supply LEDs and their meanings.
The 6000 W DC-input power supply is limited to 4000 W
maximum output when it is installed in a Catalyst 6506,
Catalyst 6509, or Catalyst 6509-NEB switch chassis. The power
supply is limited to 4500 W maximum output when it is installed
in the Catalyst 6509-NEB-A switch chassis.
25.0 A @ 3.3 VDC
12.0 A @ 12 VDC
61.2 A @ 42 VDC
25.0 A @ 3.3 VDC
12.0 A @ 12 VDC
101.9 A @ 42 VDC
25.0 A @ 3.3 VDC
12.0 A @ 12 VDC
137.4 A @ 42 VDC
The actual size of the wire needed is determined by the power
engineer or local electrician in accordance with national or local
electrical codes.
Appendix A Power Supply Specifications
OL-5781-08