Cisco 6503 - Catalyst Firewall Security Sys Installation Manual page 326

1400 W AC-Input Power Supply
Table A-13 1300 W Power Supply AC Power Cords
Locale
Argentina
Australia, New Zealand CAB-7513ACA=
Continental Europe
Israel
Italy
Japan, North America
People's Republic of
China
South Africa
Switzerland
United Kingdom
Power Distribution Unit
3
(PDU)
1. For Japan, ask your local electrical contractor to prepare the NEMA 5-20 power plug.
2. Plug contains a 13 A fuse.
3. The PDU power cable is designed for users who power their switch from a PDU. The end of the cable that plugs into the chassis power supply has
a C19 connector; the other end of the cable that connects to the PDU has a C20 connector.
1400 W AC-Input Power Supply
The 1400 W AC-input power supply (PWR-1400-AC) can be installed in the Catalyst 6503 switch and
Catalyst 6503-E switch chassis only. Due to form factor differences, the 1400 W AC-input power supply
cannot be installed in any other Catalyst 6500 series switch chassis.
The 1400 W power supplies (see
modules (PEMs), located on the front of the Catalyst 6503 and Catalyst 6503-E switch chassis, to
connect the site power source to the power supply located in the back of the chassis.
The AC-input PEM (PEM-20A-AC+) (shown in
front of the router chassis to connect the site power source to the power supply.
The PEMs have an illuminated power switch, current protection, surge and EMI suppression, and filtering
functions.
Catalyst 6500 Series Switches Installation Guide
A-18
Power Cord
Part Number
CAB-7513ACR=
CAB-7513ACE=
CAB-AC-2500W-ISRL=
CAB-7513ACI=
CAB-7513AC=
CAB-AC16A-CH=
CAB-7513ACSA=
CAB-ACS-10=
CAB-7513ACU=
CAB-C19-CBN=
AC Source Plug Type Cordset Rating
IRAM 2073 10 A, 250 VAC
SAA AS 3112 15 A, 250 VAC
CEE 7/7 16 A, 250 VAC
SI16S3 16 A, 250 VAC
CEI 23-16/7 16 A, 250 VAC
1
NEMA 5-20 20 A, 125 VAC
GB16C 16 A, 250 VAC
IEC 884-1 16 A, 250 VAC
SEV 1011 10 A, 250 VAC
2
BS 1363 13 A, 250 VAC
IEC 60320 C19 16 A, 250 VAC
IEC 60320 C20
Figure A-7) do not connect directly to source AC but use power entry
Figure A-8) provides an input power connection on the
Appendix A Power Supply Specifications
Power Cord
Reference
Illustration
Figure A-31
Figure A-32
Figure A-33
Figure A-34
Figure A-35
Figure A-36
Figure A-37
Figure A-38
Figure A-39
Figure A-40
Figure A-47
OL-5781-08