Uninstalling Zenworks 10 Configuration Management Sp3 Linux Satellite; Zone-Level Uninstallation - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - INSTALLATION 10.3 Installation Manual

This command does not remove the device from the Management zone.
7.4 Uninstalling ZENworks 10 Configuration
Management SP3 Linux Satellite
You can perform the following types of uninstallation on a Linux Satellite:
Section 7.4.1, "Zone-Level Uninstallation," on page 76
Section 7.4.2, "Local Uninstallation," on page 78

7.4.1 Zone-Level Uninstallation

In the zone-level uninstallation, you demote the Linux Satellite and remove the Satellite roles
assigned to it. Subsequently, you can remove the device from the Management Zone and uninstall
the ZENworks Adaptive Agent from it.
"Demoting a Linux Satellite" on page 76
"Uninstalling the ZENworks Adaptive Agent and Unregistering the Device from the Zone" on
page 77
Demoting a Linux Satellite
If a Linux device has satellite roles assigned to it, you demote the Satellite by removing the Satellite
roles (Authentication, Imaging, Content, and Collection).
1 At the Linux Satellite console prompt, launch the uninstallation program by entering
novell/zenworks/bin/uninstall
2 Choose the locale (language) in which you prefer to run the uninstallation program by entering
the locale number.
To select the default locale (English), enter
TIP: Pressing Enter at any prompt causes the uninstallation program to accept the default,
which is the value shown in parentheses.
3 Read the introductory text, then press Enter.
4 On the Uninstallation Type screen, select the Demote Satellite Server option by pressing Enter.
5 On the ZENworks Management Zone Information screen, enter the IP address of the Primary
Server to which the Linux Satellite is registered.
6 Enter the port number on which the Primary Server is listening.
To select the default port 443, press Enter.
7 Enter the username of the zone administrator.
To use the default username (Administrator), press Enter.
8 Enter the zone administrator's password.
9 (Conditional) If the Linux Satellite has the Imaging role configured, you are prompted to retain
the images after the uninstallation. To retain the images, press Enter.
10 Review the summary, then press Enter to begin the uninstallation.
76 ZENworks 10 Configuration Management Installation Guide
.
or press Enter.
2
/opt/