Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - INSTALLATION 10.3 Installation Manual page 22

Managed devices can be used as Satellites. If you want to use a managed device as satellite, then in
addition to the requirements listed in this section, make sure that the device is capable of performing
the satellite functions and meets the requirements listed in
page 14.
ZENworks 10 Configuration Management can manage any workstations and servers that meet the
following requirements:
Managed Device Requirements
Table 1-7
Item
Operating System:
Windows Servers
Operating System:
Windows
Workstations
22 ZENworks 10 Configuration Management Installation Guide
Requirements
Windows 2000 Server SP4
Windows Server 2003 SP1 / SP2
x86, x86-64 (Enterprise and
Standard editions)
Windows Server 2008 SP1 / SP2
x86, x86-64 (Enterprise and
Standard editions)
Windows Server 2008 R2
(Enterprise and Standard
editions)
Windows 2000 Professional SP4
x86
Embedded XP SP2 / SP3
Windows Vista* SP1 / SP2 x86,
x86-64 (Business, Ultimate, and
Enterprise versions only; Home
versions are not supported)
Embedded Vista SP1 / SP2
Windows XP Professional SP2 /
SP3 x86
Windows XP Tablet PC Edition
SP3 x86
Windows 7 x86, x86-64
(Professional, Ultimate, and
Enterprise editions)
Section 1.2, "Satellite Requirements," on
Additional Details
All the Core Editions of Windows Server
2003 and Windows Server 2008 are not
supported as a managed device platform
because they do not support the .NET
Framework.
ZENworks 10 Configuration Management
is supported on Windows Server 2003
and Windows Server 2008 editions with or
without Hyper-V.
A managed device name must not exceed
32 characters. If a device name exceeds
32 characters, that device is not
inventoried. In addition, make sure that
the device name is unique so that the
device is recognized appropriately in the
inventory reports.