Roaming Profile Policy Troubleshooting; Section A.11, "Roaming Profile Policy Troubleshooting; Source: Zenworks 10 Configuration Management; Policy Management; Browser Bookmarks Policy - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - POLICY MANAGEMENT REFERENCE 10.3 30-03-2010 Management Manual

The policy policy_name could not be successfully enforced as policy data was
empty
A.11 Roaming Profile Policy Troubleshooting
"Unable to enforce a Roaming Profile policy on a Windows Vista, Windows 7, Windows
Server 2008, or Windows Server 2008 R2 device if the user profile is stored in a shared folder
on a Windows Server 2003 device" on page 82
Unable to enforce a Roaming Profile policy on a Windows Vista, Windows 7,
Windows Server 2008, or Windows Server 2008 R2 device if the user profile is stored
in a shared folder on a Windows Server 2003 device
Explanation: If a Roaming Profile policy is assigned to a user who has not logged into a
82 ZENworks 10 Configuration Management Policy Management Reference
Source: ZENworks 10 Configuration Management; Policy Management; Browser
Bookmarks Policy.
Action: Turn on debug logging on the managed device and refer to the
messages.log
information on how to turn on debug logging, see the
ZENworks 10 Configuration Management System Administration
Action: If the problem persists, contact
support).
Source: ZENworks 10 Configuration Management; Policy Management; Browser
Bookmarks Policy.
Windows Vista, Windows 7, Windows Server 2008, or Windows Server 2008
R2 device at least once before the policy was assigned, enforcing the policy
fails on the device. This is because of insufficient permissions configured for
the shared folder containing the user profile on the Windows Server 2003
device.
Action: Perform the following steps on the Windows Server 2003 device:
1 Create a local user account with the same credentials that the user
specifies to log in to the Windows Vista, Windows 7, Windows Server
2008, or Windows Server 2008 R2 device.
For example, if the username is user1, create a local account with user1
credentials.
2 Create a folder named
For example,
3 Right-click the folder, then click Properties.
4 Click Sharing and share the folder.
5 Click Permissions to provide Full Control permissions for the user, click
Apply, then click OK.
6 Click Security.
7 In the Group or user names panel, click CREATOR OWNER, then click
Advanced.
8 In the Advanced Security Settings box, click Owner.
file to obtain more details about the error. For more
Novell Support (http://www.novell.com/
.v2.
username
.
user1.v2
zmd-
"Message Logging" in
Reference.