Creating An Installation Dvd From The Iso Download; Creating An External Certificate Authority - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - INSTALLATION 10.3 Installation Manual

For more information on the ZENworks required ports, see
Requirements," on page
(Conditional) If you plan to install the Primary Server software on 64-bit Windows Server 2003
or 64-bit Windows Server 2008, ensure that the device has Windows Installer 4.5 or later
installed.

3.3.2 Creating an Installation DVD from the ISO Download

If you obtained the ZENworks software as an ISO image download, do one of the following to
create the installation DVD:
"Using Windows to Create a ZENworks Installation DVD from an ISO Image" on page 35
"Using Linux to Create a ZENworks Installation DVD from an ISO Image" on page 35
Using Windows to Create a ZENworks Installation DVD from an ISO Image
1 Download the ZENworks 10 Configuration Management SP3 installation ISO image from the
Novell Web site (http://www.novell.com/)
Windows device.
2 Burn the ISO image to a DVD.
Using Linux to Create a ZENworks Installation DVD from an ISO Image
Optionally, you can simply run the installation program from the ISO mount point, instead of
burning the DVD:
1 Download the ZENworks 10 Configuration Management SP3 installation ISO image from the
Novell Web site (http://www.novell.com/)
device.
2 Do one of the following:
Mount the ISO image by using the following command:
mount -o loop /tempfolderpath/isoimagename.iso mountpoint
Replace tempfolderpath with the path to the temporary folder, replace isoimagename with
the ZENworks ISO filename, and replace mountpoint with the path to the file system
location where you want to mount the image. The path specified by mountpoint must
already exist.
For example:
mount -o loop /zcm10/ZCM10.iso /zcm10/install
Burn the ISO image to a DVD.

3.3.3 Creating an External Certificate Authority

If you plan to use external Certificate Authorities (CAs), install openssl and do the following to
create the certificate files:
1 To generate a private key that is needed to create a Certificate Signing Request (CSR), enter the
following command:
openssl genrsa -out zcm.pem 1024
9.
and copy it to a temporary location on your
and copy it to a temporary location on your Linux
Section 1.1, "Primary Server
Preparation 35