Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - INSTALLATION 10.3 Installation Manual page 73

Information
Components To Be
Retained
Uninstallation
Summary
Status
3 Click Finish to complete the uninstallation.
If you selected Restart Now, the device is rebooted to complete the uninstallation. If not, the
uninstallation is not complete until you reboot.
4 If there are any files in the following locations after the device has rebooted, you can delete
them manually:
CASA: If you select to retain CASA during the uninstallation, and want to remove it later,
you can do it from Windows Add/Remove Programs. If the
files\novell\casa
manually delete it.
ZENworks: Log files are purposely left here for your review. You can manually delete the
ZENworks_installation_path\ZENworks
5 For Windows, if the ZENworks Control Center icon remains on the desktop, you can manually
delete it.
Explanation
This page is displayed only if you chose to uninstall the Primary Server,
have selected the Local Uninstallation Only (Retain the Device in the
Zone) option, or have selected the Demote the Satellite Server option for
the Satellite with the Imaging role.
Select an option:
ZENworks Pre-Agent: Leaves the ZENworks Pre-Agent installed
on the device, but removes all other ZENworks software. By default,
this is not selected. If the ZENworks Pre-Agent continues to remain
on the device, then it responds to the Advertised discovery requests,
and also to ZENworks Ping requests if an IP-based discovery is
performed on the device.
To remove the ZENworks Pre-Agent from a device after ZENworks
has been uninstalled from the device, see
Pre-Agent from a Device" in
Management System Administration
CASA: Leaves the CASA software installed. By default, this is
selected because CASA can be used by other software programs.
ZENworks Imaging Files: Leaves the ZENworks Imaging files on
the device. By default, this is selected.
NOTE: If you have selected the Demote the Satellite Server option and
the device has the Imaging role configured, or if the device is a Primary
Server, then only the ZENworks Imaging Files option is enabled.
Review the information and, if necessary, use the Back button to make
changes to the information.
Displays the status of uninstallation.
By default, the Restart Now option is selected.
Restarting completes the uninstallation process. Some files are not
deleted until the device is restarted.
directory exists even after you select to uninstall CASA, you can
"Removing the ZENworks
ZENworks 10 Configuration
Reference.
c:\program
directory at any time.
Uninstalling ZENworks Software 73