Inventoried-Only Device Requirements - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - INSTALLATION 10.3 Installation Manual

1.7 Inventoried-Only Device Requirements

You can use ZENworks 10 Configuration Management to inventory workstations and servers that
cannot be managed by the ZENworks Adaptive Agent. These inventoried-only devices must meet
the following requirements:
Inventoried-Only Device Requirements
Table 1-8
Item
Operating System:
Servers
Operating System:
Workstations
Operating System:
Sessions
Requirements
AIX 4.3-5.3 IBM pSeries (RS6000)
HP-UX 10.20-11.23 HP PA-RISC (HP9000)
® 1
NetWare 5.1, 6, 6.5
OES 2 SP1 / SP2 x86, x86-64
Red Hat Enterprise Linux 2.1-4.x
Solaris 2.6–10 Sun SPARC (32 and 64-bit)
SLES 8.0-11 (all editions)
Windows 2000 Server SP4 x86
Windows Server 2003 SP1 / SP2 x86, x86-64 (Enterprise and Standard
editions)
Windows Server 2008 SP1 / SP2 x86, x86-64 (Enterprise and Standard
editions)
Windows Server 2008 R2 (Enterprise and Standard editions)
Mac OS* X 10.2.4 or later
Red Hat Linux 7.1-9
SLED 8.0-11 (all editions)
Windows 2000 Professional SP4 x86
Embedded XP SP2 / SP3
Windows Vista* SP1 / SP2 x86, x86-64 (Business, Ultimate, and
Enterprise versions only; Home versions are not supported)
Embedded Vista SP1 / SP2
Windows XP Professional SP2 / SP3 x86
Windows XP Tablet PC Edition SP3 x86
Windows 7 x86, x86-64 (Professional, Ultimate, and Enterprise
editions)
Thin Client sessions:
Windows 2000 Server SP4 x86
Windows Server 2003 SP2 x86, x86-64
Citrix XenApp MetaFrame XP
Citrix XenApp 4.5
Citrix XenApp 5.0
System Requirements 25