Performing The Installation - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - INSTALLATION 10.3 Installation Manual

4e (Conditional) If you are using an external database, then search for the line,
DATABASE_ACCES_PASSWORD=
actual password.
4f Save the file and exit the editor.
4g Make as many differently named copies as you need for your various installation
scenarios, modify each copy as necessary, then copy each one to the server where it will
be used.
If you want to add another Primary Server to the existing Management Zone, you must
provide the following information in the response file:
PRIMARY_SERVER_ADDRESS=$Primary_Server_IPaddress$
PRIMARY_SERVER_PORT=$Primary_Server_port$
PRIMARY_SERVER_CERT=-----BEGIN CERTIFICATE-----
MIID9DCCLotsOfEncryptedCharactersSja+bY05Y=-----END CERTIFICATE-----
where
PRIMARY_SERVER_ADDRESS is the IP address or DNS name of the parent Primary
Server if the secondary server is being installed to an existing Management Zone.
PRIMARY_SERVER_PORT is the SSL port used by the parent Primary Server if the
secondary server is being installed to an existing Management Zone. By default, it is 443.
PRIMARY_SERVER_CERT= is the certificate you specified on the parent Primary
Server if the secondary server is being installed to an existing Management Zone. The
certificate must be in the base64 encoded string format of an x509 certificate, and the
certificate string must be specified in one line. The above is just an example of the
certificate information.
5 After you have completed modifications to your custom response file, copy it from the path
that you specified in
installation.
6 To use the updated response file, continue with
page 61.

4.2.2 Performing the Installation

1 On the installation server where you will perform an unattended installation, insert the Novell
ZENworks 10 Configuration Management SP3 installation DVD.
For Windows, if the installation page where you can select the language is displayed, click
Cancel to exit the GUI installation.
For Linux, mount the installation DVD.
2 To start the unattended installation, use the
For Windows, run
For Linux, run
where path_to_file is either the full path to the response file that you created in
"Creating Your Response File," on page
silentinstall.properties
Using the command resolves rights issues.
sh
If you renamed the updated response file, include its new name with the path.
, and replace
Step 3 to a location on each server where you will use it for the unattended
-f
DVD_drive:\setup.exe -s -f path_to_file
sh /media/cdrom/setup.sh -s -f path_to_file
60, or a directory containing the
file (it must use that filename).
$lax.nl.env.ADMIN_PASSWORD$
Section 4.2.2, "Performing the Installation," on
option in the command:
Installing the ZENworks Server
with the
.
.
Section 4.2.1,
61