Post-Installation Tasks - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - INSTALLATION 10.3 Installation Manual

4 To create another Primary Server for the Management Zone by performing an unattended
installation, return to
5 After the installation has completed, continue with
page 63.

4.3 Post-Installation Tasks

After successfully installing ZENworks 10 Configuration Management SP3, perform the following
tasks:
Take a reliable backup of the ZENworks database on a regular basis.
For more information on how to back up the ZENworks database, see
in the ZENworks 10 Configuration Management System Administration
Procure and note down the credentials of the database.
To procure the credentials of the internal database, use one of the following commands:
zman dgc -U administrator_name -P administrator_password
or
zman database-get-credentials -U administrator_name -P
administrator_password
To procure the credentials of the external database, contact the database administrator.
Take a reliable backup of the ZENworks Server (which only needs to be done one time).
For more information on how to back up the ZENworks Server, see
Server" in the ZENworks 10 Configuration Management System Administration
Take a reliable backup of the Certificate Authority.
For more information on how to back up the Certificate Authority, see
Certificate Authority" in the
Reference.
(Conditional) If you turn on the firewall on Windows Primary Server, you must configure the
server to allow the following ZENworks 10 Configuration Management Imaging applications
through the firewall by adding them to the Windows Firewall Exceptions list:
novell-pbserv.exe
novell-proxydhcp.exe
novell-tftp.exe
novell-zmgprebootpolicy.exe
For more information, review the following sections:
"Adding Imaging Applications as Exceptions to Firewall on Windows Server 2003" on
page 63
"Adding Imaging Applications as Exceptions to Firewall on Windows Server 2008" on
page 64
Adding Imaging Applications as Exceptions to Firewall on Windows Server 2003
1 From the desktop Start menu, click Settings > Control Panel.
2 Double-click Windows Firewall.
Step 1; otherwise, continue with
ZENworks 10 Configuration Management System Administration
Step 5.
Section 4.3, "Post-Installation Tasks," on
"Database
Reference.
"Backing Up a ZENworks
"Backing Up the
Installing the ZENworks Server
Management"
Reference.
63