Upgrading The Zenworks 7 Linux Management With Ir1 Or Zenworks 7 Linux Management - Dell Edition Servers To Zenworks 7.2 Linux Management With Ir1 - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual

Section 12.2, "Upgrading the ZENworks 7.2 Linux Management Servers to ZENworks 7.2
Linux Management with IR1," on page 97
Section 12.3, "Upgrading the Managed Device to ZENworks 7.2 Linux Management with IR1/
IR1a," on page 98
Section 12.4, "Increasing the Security Level After Upgrading a ZENworks Server from
ZENworks 7 Linux Management with IR1," on page 103
Section 12.5, "Changes to Bundle Schedules in ZENworks 7.2 Linux Management with IR1,"
on page 103
Section 12.6, "Upgrade Options," on page 103
12.1 Upgrading the ZENworks 7 Linux
Management with IR1 or ZENworks 7 Linux
Management - Dell Edition Servers to ZENworks
7.2 Linux Management with IR1
You can upgrade the ZENworks 7 Linux Management with IR1 or ZENworks 7 Linux Management
- Dell Edition server to ZENworks 7.2 Linux Management with IR1 by performing an in-place
upgrade over the previous version.
Before performing any type of upgrade, do the following:
Take a reliable backup of your object and data stores, and eDirectory. For more information,
see "ZENworks Object Store and Data Store
Linux Management Administration
Ensure that eDirectory is listening on port 10389.
Take an image of the ZENworks servers.
Ensure that the ZENworks Linux Management server and the server on which the Oracle or the
PostgreSQL database is running are in time sync.
Remove OpenLDAP 2 from the ZENworks Server, if it is installed.
1. To verify whether OpenLDAP 2 has been installed, execute
the server console prompt. This displays the installed package version.
2. To remove Open LDAP 2, execute
Performing an in-place upgrade lets you upgrade from the ZENworks 7 Linux Management with
IR1 or ZENworks 7 Linux Management - Dell Edition release to ZENworks 7.2 Linux Management
with IR1 using the same ZENworks Primary Server. For example, suppose your ZENworks Primary
Server on your ZENworks 7 Linux Management with IR1 system is installed on a SLES 9 32-bit
device and you want to upgrade to ZENworks 7.2 Linux Management with IR1. Using an in-place
upgrade results in the previously described ZENworks Linux Management system being upgraded
to ZENworks 7.2 Linux Management with IR1 on that same SLES 9 32-bit device.
The upgrade process upgrades the ZENworks Server and lets you create upgrade bundles for each
supported platform. The individual upgrade bundles are then pushed to assigned devices to install
the new ZENworks Agent on each device.
94 Novell ZENworks 7.2 Linux Management Installation Guide
Maintenance" in the
Guide.
.
rpm -e openldap2
Novell ZENworks 7.27.3
rpm -qa |grep openldap2
at