Local Uninstallation - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - INSTALLATION 10.3 Installation Manual

NOTE: If the uninstallation fails, see the following log files:
/var/opt/novell/log/zenworks/
Zenworks_Satellite_Server_Uninstalltimestamp.xml
/tmp/err.log

7.4.2 Local Uninstallation

The Local Uninstallation option uninstalls only the ZENworks Adaptive Agent.
1 Ensure that you have the permission to uninstall the Linux Satellite.
The Allow Users to Uninstall Agent option must be selected by the zone administrator in
ZENworks Control Center (Configuration tab > Management Zone Settings > Device
Management > ZENworks Agent > General).
2 At the Linux Satellite console prompt, launch the uninstallation program by entering
novell/zenworks/bin/uninstall
3 Choose the locale (language) in which you prefer to run the uninstallation program by entering
the locale number.
To select the default locale (English), enter
TIP: Pressing Enter at any prompt causes the uninstallation program to accept the default,
which is the value shown in parentheses.
4 Read the introductory text, then press Enter.
5 On the Uninstallation Type screen, select the Local Uninstallation option by entering 2, then
pressing Enter again to finalize the selection.
6 (Conditional) If the Linux Satellite has the Imaging role configured, you are prompted to retain
the images after the uninstallation. To retain the images, press Enter.
7 Review the summary, then press Enter to begin the uninstallation.
The ZENworks uninstallation program uninstalls the ZENworks Adaptive Agent by removing
all the RPMs related to the Linux Satellite.
8 (Conditional) If the uninstallation fails, see the following log files:
/var/opt/novell/log/zenworks/
Zenworks_Satellite_Server_Uninstalltimestamp.xml
/tmp/err.log
After the uninstallation of ZENworks Adaptive Agent, the Linux device object is still displayed in
ZENworks Control Center (Configuration tab > Server Hierarchy panel) as having all the Satellite
roles even though all the packages and RPMs related to the roles are removed from the device. If
you want to delete the object, do the following in ZENworks Control Center:
1 Remove the roles assigned to the Satellite.
For more information on how to remove the roles, see
Hierarchy" in the
2 Click the Devices tab > Servers folder.
3 Select the check box next to the Linux server, then click Delete.
78 ZENworks 10 Configuration Management Installation Guide
.
ZENworks 10 Configuration Management System Administration
or press Enter.
2
"Removing Satellites from the Server
/opt/
Reference.