System Requirements; Primary Server Requirements - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - INSTALLATION 10.3 Installation Manual

System Requirements

1
The following sections provide the Novell
requirements for hardware and software:
Section 1.1, "Primary Server Requirements," on page 9
Section 1.2, "Satellite Requirements," on page 14
Section 1.3, "Management Zone Version Requirements," on page 17
Section 1.4, "Database Requirements," on page 20
Section 1.5, "LDAP Directory Requirements," on page 21
Section 1.6, "Managed Device Requirements," on page 21
Section 1.7, "Inventoried-Only Device Requirements," on page 25
Section 1.8, "Administration Browser Requirements," on page 27
Section 1.9, "Installation User Requirements," on page 27

1.1 Primary Server Requirements

The server where you install the Primary Server software must meet the following requirements:
Primary Server Requirements
Table 1-1
Item Requirements
Server Usage Your server might be capable of
handling tasks in addition to the tasks
a Primary Server performs for
ZENworks 10 Configuration
Management. However, we
recommend that any server where you
install the Primary Server software be
used only for ZENworks 10
Configuration Management purposes.
® ®
ZENworks 10 Configuration Management SP3
Additional Details
For example, you might not want the server
to do the following:
Host Novell eDirectory
Host Novell Client32
Host Active Directory*
Be a terminal server
1
TM
TM
System Requirements 9