Installation Information - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - INSTALLATION 10.3 Installation Manual

4.1.1 Installation Information

The information you need is listed in the order of the installation flow.
Installation Information
Table 4-1
Installation
Information
Installation path
(Windows only)
Response file
path (optional)
Prerequisites
50 ZENworks 10 Configuration Management Installation Guide
Explanation
For Windows, the default is
currently available on the server. The installation program creates the
Novell\ZENworks directory here for the installation of the ZENworks software files.
IMPORTANT: If you want to install Reporting Server on a 64-bit Windows device that
is using an Oracle database, you must specify a customized location to install
ZENworks Configuration Management. This customized location must not include
any parentheses in the pathname because Reporting Server fails to install in a path
that has parentheses.
If you need more disk space for your content repository than is in the Windows path
that is available during installation, you can change the path to another location after
completing the installation. For more information, see
ZENworks 10 Configuration Management System Administration
For Linux, several fixed installation paths are used:
/opt/novell/zenworks/
/etc/opt/novell/zenworks
/var/opt/novell/zenworks
/var/opt/novell/log/zenworks/
If you are concerned about disk space on the Linux server, the
where the database and content repository reside. Make sure it is on a partition large
enough for them.
If you started the installation executable with the
provide a path for the file. The default path is
Settings\Administrator\
current server.
The Primary Server software is not installed when you run the program to create a
response file. It only displays the installation pages necessary to identify and create
the response file.
If the required prerequisites are not installed, you are not allowed to continue with the
installation. The requirements that are not fulfilled are displayed (GUI) or listed
(command line). For more information, see
Requirements," on page 9.
If the .NET prerequisite is not fulfilled, you can click the ZENworks link in the
description to install the runtime version that is bundled with ZENworks. After .NET is
installed, the installation of ZENworks proceeds.
%ProgramFiles% . You can change it to any path
"Content
-s parameter, you are required to
C:\Documents and
, which you can change to any path available on the
Section 1.1, "Primary Server
Repository" in
Reference.
directory is
/var/opt