Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - INSTALLATION 10.3 Installation Manual page 48

DVD_drive\setup.exe -o
3. Continue with
Command Line Installation (Linux only)
1. On the installation server, insert the Novell ZENworks 10 Configuration Management SP3
installation DVD.
2. Mount the DVD.
3. To start a command line installation, do the following:
For more information on installation arguments, see
Arguments," on page
4. Continue with
2 During installation, refer to the information in
for details on the installation data that you need to know.
If you are using the GUI installation, you can also click the Help button for similar information.
For the command line method, you can type
installation option to make changes.
3 Do one of the following on the Windows device:
If you selected to reboot automatically (you selected the Yes, restart the system option
during installation; see
booting process has completed and the services have started.
If you selected to reboot manually (you selected the No, I will restart the system myself
option during installation; see
installation to complete and the services to start in order to verify it in
NOTE: On Windows or Linux, part of completing the installation process is for the database to
be updated and for the PRU to be downloaded and installed, both of which cause high CPU
utilization during their processes. This can cause the services to start up slowly, which can also
affect how long it takes for ZENworks Control Center to open.
4 After the installation has completed and the server has been rebooted, do any of the following
to verify that ZENworks 10 Configuration Management SP3 is running:
Run ZENworks Control Center
If ZENworks Control Center did not automatically start, use the following URL to open
ZENworks Control Center in a Web browser:
https://DNS_name_or_IP_address_of_Primary_Server/zenworks
This can be done either on the server where you just installed ZENworks, or on a qualified
workstation.
48 ZENworks 10 Configuration Management Installation Guide
Step 2 below.
a. To a directory where all (including "others") have read and execute access, either
mount the DVD or copy the DVD's files.
This cannot be in
/root
If you copy the DVD's files, make sure that all (including "others") continue to have
read and execute access to the destination directories.
b. Run the following command:
sh /mount_location/setup.sh -e
79.
Step 2 below.
"Rebooting (or not)" on page
or any directory under it.
Appendix A, "Installation Executable
Table 4-1, "Installation Information," on page 50
and press Enter to return to a previous
back
59), continue with
"Rebooting (or not)" on page
Step 4 after the
59), you must wait for the
Step 4.