Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - INSTALLATION 10.3 Installation Manual page 49

If ZENworks Control Center does not open, and you are using DNS, verify that DNS is set
up correctly. It must be working properly in order for ZENworks Control Center to open
on the server. After you reconfigure DNS to work properly, then ZENworks Control
Center should be accessible from the desktop icon.
For the Oracle 10g database, any administrator name is case sensitive, including login
names from user sources. The default ZENworks administrator account automatically
created during installation uses an initial capital, so in order to log in to ZENworks
Control Center, you must enter
Check the Windows services by using the GUI
On the server, click Start, select Administrative Tools > Services, then review the status of
the Novell ZENworks Loader and Novell ZENworks Server services.
If they are not running, start the ZENworks services. Right-click the Novell ZENworks
Server service, select Start, right-click the Novell ZENworks Loader service, then select
Start.
The Restart option stops all related services that are already running and starts each of
them in their correct order, including Novell ZENworks Loader.
Check the Linux services by using the configuration command
On the server, run the following command:
/opt/novell/zenworks/bin/novell-zenworks-configure -c SystemStatus
This lists all ZENworks services and their statuses.
To start the services, run the following command:
/opt/novell/zenworks/bin/novell-zenworks-configure -c Start
Check the Linux services by using the specific services' commands
On the server, run the following commands:
/etc/init.d/novell-zenserver status
/etc/init.d/novell-zenloader status
If the services are not running, run the following commands to start the ZENworks
services:
/etc/init.d/novell-zenserver start
/etc/init.d/novell-zenloader start
5 (Optional) If you want to set certain configuration parameters for how ZENworks is run on this
server, see "Using the Config.xml File to Modify ZENworks Control Center
ZENworks 10 Configuration Management System Administration
6 Do any of the following that are applicable, then continue with
To create another Primary Server for the Management Zone using the same installation
method that you just used, return to
If you created a response file
servers, continue with
7 Continue with Section 4.3, "Post-Installation Tasks," on page
Administrator
Step 1.
in order to perform an unattended installation on other
Section 4.2.2, "Performing the Installation," on page
.
Settings" in the
Reference.
Step 7:
63.
Installing the ZENworks Server
61.
49