2.2 ZENworks Asset Management
The following information applies to ZENworks 10 SP3 coexistence with ZENworks 7.5 Asset
Management (ZAM 7.5):
Server Coexistence: There are no known coexistence issues. For performance reasons,
however, we recommend that you do not install a ZENworks 10 Server on the same network
server as a ZAM 7.5 Server.
Agent Coexistence Beginning with ZAM 7.5 IR19, the ZENworks 10 Adaptive Agent
(including the Inventory-Only Agent) and ZAM 7.5 client can coexist.
2.3 ZENworks Patch Management
The following information applies to ZENworks 10 SP3 coexistence with ZENworks 7.x Patch
Management (ZPM 7) and ZENworks Patch Management 6.4 (ZPM 6.4):
Server Coexistence: There are no known coexistence issues. For performance reasons,
however, we recommend that you do not install a ZENworks 10 Server on the same network
server as a ZPM 7/ZPM 6.4 Server.
Agent Coexistence: The ZENworks 10 Adaptive Agent and ZPM 7/ZPM 6.4 Agents can
coexist. If you decide to use ZENworks 10 Patch Management instead of ZPM 7/ZPM 6.4, you
can remove the ZPM 7/ZPM 6.4 Agent because ZENworks 10 Patch Management uses the
ZENworks 10 Adaptive Agent.
2.4 ZENworks Server Management
The following information applies to ZENworks 10 SP3 coexistence with ZENworks 7.x Server
Management (ZSM 7) and ZENwork for Servers 3.x (ZfS 3):
Server Coexistence: There are no known coexistence issues. For performance reasons,
however, we recommend that you do not install a ZENworks 10 Server on the same network
server as a ZSM 7/ZfS 3 Servers.
Agent Coexistence: ZSM 7 and ZfS 3 do not include an agent.
2.5 ZENworks Linux Management
The following information applies to ZENworks 10 SP3 coexistence with ZENworks 7.x Linux
Management (ZLM 7):
Server Coexistence: There are two issues related to server coexistence:
Issue 1: The ZENworks 10 Server (Linux version) cannot coexist with the ZLM 7 Server.
Do not install the ZENworks 10 Server on any Linux server that already has a ZLM 7
Server installed.
Issue 2: The ZENworks 10 Satellite (Linux version) cannot coexist with the ZLM 7
Server. Do not install the ZENworks 10 Satellite on any Linux server that already has a
ZLM 7 Server installed.
Server/Agent Coexistence: The ZENworks 10 Server and Satellite (Linux versions) cannot
coexist with the ZLM 7 Agent, meaning that the ZENworks 10 Server and Satellite cannot be a
managed device in your ZLM 7 zone. Do not install the ZLM 7 Agent on the same Linux server
as a ZENworks 10 Server or Satellite.
30
ZENworks 10 Configuration Management Installation Guide