Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - INSTALLATION 10.3 Installation Manual page 12

Item
Firewall Settings:
TCP Ports
12 ZENworks 10 Configuration Management Installation Guide
Requirements
80 and 443
2645
5550
Additional Details
Port 80 is for Tomcat non-secure port.
Port 443 is for Tomcat secure port. It is also
used by default to download system
updates from NCC and to download Product
Recognition Update (PRU).
Primary Server downloads patch license
related information and checksum data over
HTTPS (port 443), and the actual patch
content files over HTTP (port 80).
ZENworks Patch Management license
information is obtained from the
licensing server (http://
novell.patchlink.com), the patch content and
checksum data is retrieved from an AKAMAI
hosted content distribution network
(novell.cdn.lumension.com). You must
make sure that the firewall rules allow
outbound connections to these addresses
because the patch content distribution
network is a large fault tolerant network of
cache servers.
Port 443 is also used for CASA
authentication. Opening this port allows
ZENworks Configuration Management to
manage devices outside of the firewall. It is
a good practice to make sure that the
network is configured to always allow
communication on this port between the
ZENworks Server and ZENworks Agents on
managed devices.
If other services are running on ports 80 and
443, such as Apache, or are used by OES2,
the installation program asks you for new
ports to use.
IMPORTANT: If you plan to use
AdminStudio 9.0 ZENworks Edition, it
requires that the Primary Server is using
ports 80 and 443.
Used for CASA authentication. Opening this
port allows ZENworks Configuration
Management to manage devices outside of
the firewall. It is a good practice to make
sure that the network is configured to
always allow communication on this port
between the ZENworks Server and
ZENworks Agents on managed devices.
Used by Remote Management Listener by
default.You can change this port in the
Remote Management Listener dialog box in
ZENworks Control Center.
Lumension*