Using A Specific Network Card For Devices Running Dual Nics - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual

Using a Specific Network Card for
I
Devices Running Dual NICs
You can chose to use a specific network card for a device running dual NICs by using one of the
following ways:
Modify the
/srv/tftp/z_auto.cfg
the following line at the end of the Append command:
netdevice=eth0
or the
/srv/tftp/z_maint.cfg

Using a Specific Network Card for Devices Running Dual NICs

file (or both) by adding
I
667