Table of Contents
Advertisement
Appendix A — Hardware Settings
EDIUS Generic HDV Settings
Canopus HQ Codec Settings
Video Overlay Settings
EDIUS Generic OHCI Settings
System/Output Settings
748
5. Click the
button to save settings and close the settings dialog.
OK
Generic HDV Settings are accessed by selecting Settings>Hardware Set-
tings from the Preview window and then selecting Generic HDV Settings.
Note
If the Hardware Settings tree is collapsed, click the "+" to expand the tree.
There are two settings dialogs for Generic HDV devices; "Canopus HQ
Codec Settings" and "Video Overlay Settings."
See Canopus HQ Codec Settings
See Video Overlay Settings
Generic OHCI Settings are accessed by selecting Settings>Hardware Set-
tings from the Preview window and then selecting Generic OHCI Settings.
Note
If the Hardware Settings tree is collapsed, click the "+" to expand the tree.
There are three settings dialogs for Generic OHCI devices; "System/
Output Settings", "DV Device Settings" and "Video Overlay Settings."
To define System/Output Settings for a generic OHCI device, do the fol-
lowing:
1. If necessary, click the "+" to expand the Generic OHCI Settings tree.
Select "System/Output Settings" from the Generic OHCI Settings tree. The
dialog in
Figure 886
appears.
on page
719.
on page
721.
EDIUS — User Reference Guide
Advertisement
Table of Contents
