GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual page 270

Section 4 — Clip Operations and Management
270
Figure 264. Mark In Menu
2. Select "Set Video In" or "Set Audio In" to mark an In point for video or
audio only.
3. Set the desired video or audio Out point.
Note The procedure is the same for marking an Out point for video or audio only
except the list button ( ) on the Out button is clicked.
You may also set the
clicking on the button sets the In or Out point according to the selected
mode:
• Video Only
• Audio Only
• Video and Audio
To change the button mode, click the In/Out toggle button in the
In/Out
bottom left corner of the Player window (see
Figure 265. In/Out Mark Toggle Button
The and buttons in
In Out
audio and video as there is no video or audio symbol on the buttons.
and buttons to one of three modes such that
In Out
Figure 265 mark the In and Out point for both
Figure 265).
EDIUS — User Reference Guide