Changing The Assigned Camera - GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual

Changing the Assigned Camera

EDIUS — User Reference Guide
To display only the selected camera in a single monitor, do one of the fol-
lowing:
• Select Mode>Show only selected camera from the Preview window
menu bar.
• Click the list button [ ] on the
Selected Camera" from the menu.
When a clip is placed on the Timeline in multi cam mode, it is automatically
assigned a camera number based on the V or VA track in which the clip is
placed. These Camera mappings may be changed while editing.
Note A track is not displayed in multi cam mode when no camera is assigned to
that track.
To change the camera mapping assignment for a particular track, do the fol-
lowing:
1. Click the
Camera mapping
for which you wish to change the camera assignment. See
Note The Camera mapping indicator is only displayed when in multi cam mode.
Figure 528. Track Panel Camera Mapping Indicator
2. From the menu, select the camera to be assigned to the selected track as
illustrated in Figure
Note If a camera number is selected which does not exist in the multicam display,
the Camera mapping indicator is greyed out. This can occur if the number of
selected multi cam monitors is, for example, 3, and you try to assign camera
number 5 to a track.
button and select "Show only
Multi cam
indicator on the track panel of the V or VA track
529.
Multi Cam Mode
Figure 528.
465