Placing Clips By Channel - GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual

Placing Clips by Channel

EDIUS — User Reference Guide
Figure 357. Asset Bin - Show in Player
Review the clip in the Player. If necessary, set In and Out points using the
procedures documented in In and Out Points
2. Click the
Set Add Video
disable the video or audio elements as desired.
Note If the Set Add Video or Set Add Audio buttons have a diagonal red line
through them (clicking the button toggles between the enabled and disabled
states), the corresponding clip element will not be placed on the Timeline.
Note [SHIFT]+[J] also toggles the Set Add Video button and [SHIFT]+[K] also
toggles the Set Add Audio button.
3. Select the track on which to place the clip.
4. Position the Timeline cursor at the desired insertion point.
5. Click the
Insert to Timeline
Only the video or audio of the clip is placed on the Timeline at the Timeline
cursor position.
Alternative Methods:
• After Step 2, drag and drop the clip in the Player to the Timeline
• Set In and Out points for the video or audio element only. Click
or
Timeline Overwrite to Timeline
or
Set Add Video Set Add Audio
points is placed on the Timeline.
Placing clips by channel operates with the Video Channel and Audio
Channel settings for the track in the Track Panel.
buttons in the Track Panel which enable channel filtering.
on page
or
Set Add Audio
or
Overwrite to Timeline
. In this case, regardless of the state of the
buttons, only the element with In and Out
Figure 358
Clip Placement
326.
button to enable or
button.
Insert to
illustrates the
335