Section 6 — Effects and Titles
Adding Effects Between Clips
Clip Margin
514
Effects such as transitions and audio cross fades may be added between
clips.
In Extend mode (see Extend Mode
transitions or audio cross fades between clips requires that both clips have
a margin. The margin is the portion of the video clip that is outside the
range between the In and Out points.
In Fix mode (see Fix Mode
required between clips.
Note
When adding transitions and cross fades, the length of the clips and the
sequence changes depending upon the current editing mode (Extend or Fix).
No margin is present if the Out point of the first clip is set at the end of the
clip and the In point of the second clip is at the beginning of the clip.
If there is no margin between clips, the black triangles illustrated in
Figure 585
are present on the clips. The triangles indicate that the Out point
of first clip is at the end of the clip and the In point of the second clip is at
the beginning of the clip.
Figure 585. Clips with No Margin
If there is a margin between clips, the black triangles do not appear as
shown in
Figure
586.
Figure 586. Clips with Margin
on page 308
for more information), adding
on page 309
for more information), no margin is
EDIUS — User Reference Guide