Capture And Restore - GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual

Capture and Restore

EDIUS — User Reference Guide
Capture Only Areas Used in Timeline
Click the
Start batch capture
Offline Clip dialog to display the Batch Capture dialog. Use the batch
capture dialog to recapture the portions of the offline clip(s) used on the
Timeline.
For more information on the batch capture procedure see Batch Capturing
on page 228.
Don't Capture
If this method is selected, offline clips are not relinked or recaptured.
3. Select the source from the Open or Browse for Folder dialog and click
the (Open dialog) or
Open
the source to the offline clip.
4. Click the button in the Restore Offline Clip dialog.
Close
Note When the Restore Offline Clip Close button is clicked, a message will display
if restoration failed on any offline clips.
5. Click the button in the Find Offline Clip dialog.
Close
Alternative Method:
Double-click the offline clip on the Timeline or in the Asset Bin and browse
for the file to link to the clip from the Open dialog box.
When the source file(s) of offline clip(s) do not exist on the hard drive, you
can recapture them to restore the offline clips.
To capture and restore offline clips, follow these steps:
1. Click the
Capture entire clip
in the Find Offline Clip dialog as illustrated in
button in the lower left corner of the Restore
(Browse for Folder dialog) button to relink
OK
or
Capture only the area used in the Timeline
Restore Offline Clips
button
Figure 79.
101