Section 5 — Timeline Operations
Undo/Redo Operations
Undo an Operation
478
Selected clips are copied to the specified track as illustrated in
Note
If other clips have already been placed on the destination track, an alert
message appears. Click to OK button to continue copying enabled clips to the
specified track.
Figure 541. Enabled Clips Copied to a Single Track
Note
If multiple valid clips are placed between camera switch points, the priority is
given to the clip on the highest numbered track. In the example above, there
are valid (enabled) clips on the 3VA, 2VA and 1VA tracks before the first
switch point. When the clips are copied to the new 4VA track, the clip in the
3VA track before the first switch point is copied.
To undo a previously-performed operation and return to the prior state, do
any of the following:
• Click the
button (highlighted in blue in
Undo
line.
Figure 542. Timeline Undo Button
Figure
Figure
542) on the Time-
EDIUS — User Reference Guide
541.