Table of Contents
Advertisement
Aurora Edit Application Con guration
Setting Up Media Files for Sharing
Before you can transfer media les to another Aurora Edit workstation, you need to
set up your workstation for sharing.
To share les:
1. In Windows Explorer, navigate to the drive where media les are stored (usually
2. Right click on the VibrintAVFiles folder and choose Sharing.
3. Select the Shared As option and leave the default share name VibrintAVFiles.
The folder you shared appears with the standard Windows sharing icon.
About Aurora Edit video sources
Before using footage from a particular source, you need to add the source to the Aurora
Edit source list. Aurora Edit pre-installs two sources for you
clip source:
Video source
Clip source
Add Source—General settings
Setting
Source Name
Description
Source Type
90
Aurora Edit Installation Guide
D:\).
Click
.
OK
Allows you to record footage directly into the Timeline or Bin; usually
a tape deck.
Allows you to edit a clip as a Timeline source directly in the Bin, which
is useful for large clips so you don t have to go back and forth from a
tape deck. You only need one clip source; you don t have to create a
new clip source for each clip you want to use
Options
Video
Source
Clip Source
Microphone
1394
Source
Description
Enter a name for the source, such as Tape Deck.
Enter a description for the source.
Select Video Source for all incoming sources, including
audio sources.
Select Clip Source to use an existing clip in the bin as a
source.
Select Microphone for any microphone sources.
Select 1394 Source when connecting to a speci c 1394
source if multiple IEEE devices are present.
a video source and a
4 October 2010
Advertisement
Table of Contents
