GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual page 474

Section 5 — Timeline Operations
474
The clip from the selected camera is activated and the clips from the other
cameras are disabled as illustrated in
camera is switched from Camera 3 to Camera 1 at the first switch point.
Figure 537. Switch from Camera Three to Camera 1
Alternative Method:
• With playback stopped, move the Timeline cursor to the clip to which
you wish to switch at a particular switch point and press the number [
to [ ] on the numeric keypad of the camera to which you wish to switch.
8
Related Operations:
• To set a camera switch point and switch the camera simultaneously, do
one of the following:
• Move the Timeline cursor to the point at which you wish to set a
switch point and switch to the selected camera and press the camera
number key [
1
the [ ] key.
CTRL
• Move the Timeline cursor to the point at which you wish to set a
switch point and switch to the selected camera and double-click the
desired track camera in the multi cam display.
Figure
] to [ ] on the numeric keypad while holding down
8
537. In this example, the
EDIUS — User Reference Guide
]
1