DV Device Settings
EDIUS — User Reference Guide
7. Select the "Enable Wide Screen Signaling" if content is to be displayed
on televisions that support WSS with automatic aspect ratio (4:3 or 16:9)
switching.
8. Set the desired Balanced Audio Settings for "Input Headroom [dB]",
"Input Level [dBu]", "Output Headroom [dB]", and "Output Level
[dBu]" by selecting the desired setting from the associated drop-down
lists.
For SXH-E1, proceed to
Note
Step 9
and
Step 10
9. From the "Analog Audio Monitoring" drop-down list box, select the
desired channel for audio monitoring. Choices are: Ch 1/2, Ch 3/4 or
Ch 1+3/2+4.
10. If applicable, select the two VBI lines on which VITC (vertical interval
timecode) data is present. Typically, this is lines 14 and 16 for NTSC and
lines 19 and 21 for PAL video.
11. Click the
button to save the settings and close the General I/O
OK
Settings dialog.
While in the General I/O Settings dialog, clicking the
returns all settings marked with an "*" to their default values.
1. If necessary, click the "+" to expand the SHX-E1/SHX-E2 Settings tree.
2. Select "DV Device Settings" from the SHX-E1/SHX-E2 Settings tree. The
dialog in
Figure 864
EDIUS SP/SP-SDI (SHX) Settings
Step
11.
apply to SHX-E2 hardware only.
appears.
button
Default*
713