Additional Rubberband Adjustments; Entering Value Adjustments - GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual

Additional Rubberband Adjustments

Entering Value Adjustments

EDIUS — User Reference Guide
• Dragging the point horizontally changes the position of the point on the
Timeline at which the adjustment takes place.
• Dragging the point while pressing the [SHIFT] key adjusts the entire
rubber band from the adjustment point to the end of the clip or to the
next adjustment point. See
Figure 789. Pan Point Adjusted with SHIFT Key
• Dragging the point while pressing the [CTRL] key provides fine ver-
tical adjustments.
• Pressing the [SHIFT]+[ALT] keys and dragging the rubber band adjusts
the entire rubber band vertically.
• Pressing the [ALT] key and clicking on the rubberband where no
adjustment point exists add points and adjusts the rubber band
between these new points.
To delete a point from the rubber band, right-click on the point and select
Add/Delete from the menu.
Volume and pan can also be adjusted by right clicking on a rubber band
point and selecting the adjustment method from the menu. See
1. If the audio track is not expanded, click the
2. Click the
Volume/Pan
3. Right-click the desired rubber band point. The menu in
appears.
Figure 789.
toggle button to select the desired rubber band.
Entering Value Adjustments
Figure
button.
Expand
Figure 790
790.
645