Appendix A — Hardware Settings
Input Settings
744
5. Set the SD Component Gain by moving the slider to select the desired
value.
6. From the Audio Monitor drop-down list, select the desired channel(s)
for audio monitoring.
7. If audio is output via HDMI, select the desired audio channel output.
8. Enter the vertical blanking interval line(s) on which VITC (vertical
interval timecode) is output.
9. Click the
button to save the settings and close the General I/O
OK
Settings dialog.
While in the General I/O Settings dialog, clicking the
returns all settings marked with an "*" to their default values.
1. If necessary, click the "+" to expand the HTX-E1 Settings tree.
2. Select "Input Settings" from the HTX-E1 Settings tree. The dialog in
Figure 884
appears.
button
Default*
EDIUS — User Reference Guide