Export To Tape; Output To Hdv (Generic Hdv) Device - GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual

Section 8 — Exporting/Project Output

Export to Tape

Output to HDV (Generic HDV) Device

702
6. Select the folder location, file name and file type in which to save the
exported image(s)
7. Select advanced still image save parameters, if desired, by clicking the
button. The Advanced Settings dialog in
Advanced
Figure 854. Advanced Still Image Save Settings
8. Click the
Save Single Picture
button to save still image(s) to the selected location.
files
Save Single Picture
Exports the frame at the Timeline cursor position as a still image.
Save Between In/Out in Sequential Files
Exports all frames between In and Out points on the Timeline as still
image files. 8-digit sequential numbers are added to the end of each file
name.
Images are exported as explained above depending on the selected file save
button.
9. Click the button to close the Still Image Exporter.
Close
Projects may be exported to tape on any device than can be connected to
and controlled by the EDIUS computer and many devices through which
control via deck settings is not possible.
To output an HDV file (.m2t format) to a tape in an HDV device, do the fol-
lowing:
1. Connect the HDV device to the IEEE1394 port on the EDIUS computer
with a FireWire/IEEE1394 cable.
button or the
Save between In/Out in sequential
EDIUS — User Reference Guide
Figure 854 appears.