GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual page 388

Section 5 — Timeline Operations
Button Function
Previous Frame
Profile (Play/Pause)
Next Frame
Move to Previous Edit
Point - Trim
Trim -10 Frames
Trim -1 Frame
Play the Event Area
Trim 1 Frame
Trim 10 Frames
Move to Next Edit Point -
Trim
Trim - Select IN Point
Trim - Select OUT Point
Trim - Select Slide
Trim - Select Slip
Trim - Select Roll
Normal Mode
388
Trim Mode operation button details are provided in
Table 5. Trim Mode Operation Buttons
Move to the previous frame
Play the Timeline in the normal direction. When clicked during playback, playback is
paused.
Move to the next frame.
The focus and the Timeline cursor move to the edit point (cut point) to the left of the
current cut point.When no cut point is selected, the focus and the Timeline cursor
move to the edit point to the left of the current position.
Adjust the trim position by -10 frames from the current position.
Adjust the trim position by -1 frame from the current position.
Repeatedly play the video around the selected cut point. Click again to stop.
Adjust the trim position by +1 frame from the current position
Adjust the trim position by +10 frames from the current position
The focus and the Timeline cursor move to the edit point (cut point) to the right of
the current cut point.When no cut point is selected, the focus and the Timeline cur-
sor move to the edit point to the right of the current position.
Select the IN point of the clip nearest to the Timeline cursor on the selected track.
Select the OUTpoint of the clip nearest to the Timeline cursor on the selected track.
When slide trim is enabled, select the cut point of the clip nearest to the Timeline
cursor on the selected track
When slip trim is enabled, select the cut point of the clip nearest to the Timeline cur-
sor on the selected track.
When rolling trim is enabled, select the cut point of the clip nearest to the Timeline
cursor on the selected track.
Switches the display from Trim Mode to Normal Mode
Note Some of the functions above may be disabled when a cut point is selected
while trimming is disabled, or, when no cut point exists to which to move on
the selected track.
Description
EDIUS — User Reference Guide
Table 5
Keyboard Shortcut
[<--]
[ENTER]
[-->]
[Page Up]
[SHIFT]+[,]
[,]
[/]
[.]
[SHIFT]+[.]
[Page Down]
[F5}