Setting In/Out Points And Placing A Clip - GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual

Setting In/Out Points and Placing a Clip

EDIUS — User Reference Guide
Start of Clip Transition Indicator
The yellow triangle shown in
mixer area indicates that a transition has been set at the beginning of the
clip.
Figure 354. Beginning of Clip Transition Indicator
Transparency Rubber Band
Click the button to display the Transparency adjustment area. Click
Expand 2
the Mix button to display the Transparency rubber band as shown in
Figure 355. See Clips with Keyer effects applied display an aqua blue line at the
top of the mixer area. on page 526
Figure 355. Transparency Adjustment
To set In/Out point on a clip and place it on the Timeline at the Timeline In
point, do the following:
1. Select the desired clip in the Asset Bin and click the
(highlighted in blue in
Note You may also drag and drop an clip from the Asset Bin to the Player
Figure 354 in the lower left corner in the
for more information.
Figure 356).
Clip Placement
button
Show in Player
333