Rendering Between In An Out Points; Rendering Overload Areas - GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual

Section 5 — Timeline Operations

Rendering Between In an Out Points

Rendering Overload Areas

446
Various areas needing rendering between In and Out point may be ren-
dered using the procedures explained in this section.
To render overload areas between the In and Out points, do the following:
1. If necessary, set the desired In and Out points on the Timeline.
2. Click the
Render In/Out - Render overload
Figure 500.
Figure 500. Timeline Render In/Out - Render Overload Button
Note Click the Abort button in the Rendering dialog to stop rendering in progress.
When rendering is complete, a green line appears on the time scale above
the rendered area.
Alternative Methods:
• Select Render>Render In/Out> Render Overload Area from the
Preview window menu bar.
• Click the list button [ ] on the
and select "Render In/Out>Render Overload Area" from the menu.
• Right-click the time scale and select "Render In/Out>Render Overload
Area" from the menu.
• Press the [ ]+[
CTRL
area button highlighted in blue in
Render In/Out - Render overload area
] keys on the keyboard.
Q
EDIUS — User Reference Guide
button