Video Overlay Settings - GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual

Video Overlay Settings

EDIUS — User Reference Guide
Note The "Max size min" allows you to limit the capture bitrate. 100% means no
codec compression and the bitrate will be the same as the captured source.
Setting a lower limit - e.g. 40 - limits the capture to a bitrate that is 40% (or
whatever number is selected) of the original source. A 1440x1080 59.94i
source has a bitrate of approximately 750 Mbps. If you want the upper limit
to be 200 Mbps, for example, set the "Max size min" slider at 27 (200 is
approximately 27% of 750).
Clicking the button resets all settings to the defaults.
Default
5. Click the button to save settings and exit the settings dialog.
OK
Video playback on the EDIUS computer monitor is performed using video
overlay.
To define Video Overlay Settings for any device, do the following:
1. If necessary, click the "+" to expand the settings tree for the device.
2. Select "Video Overlay Settings" from the device settings tree. A dialog
similar to that in Figure 870
EDIUS SP/SP-SDI (SHX) Settings
appears.
721