Deleting In And Out Points On The Timeline; Placing Clips On The Timeline; Using Clips In The Asset Bin - GRASS VALLEY EDIUS VERSION 5.1 User Reference Manual

Deleting In and Out Points on the Timeline

Placing Clips on the Timeline

Using Clips in the Asset Bin

EDIUS — User Reference Guide
To delete In and Out points on the Timeline, do the following:
1. Click the list button ( ) of the
2. Select "Clear In" or "Clear Out" on the menu.
Alternative Methods:
• Right-click on the time scale and select "Clear In" or "Clear Out."
• Select Marker on the menu bar and select "Delete In" or "Delete Out."
You can delete both In and Out points simultaneously by any of the fol-
lowing methods:
• Right-click on the time scale and select "Clear In/Out."
Note If you select "Delete In/Out from the menu, both the In and Out points and the
clip between these points is deleted.
• Select Marker on the menu bar and select "Delete In/Out."
• Press on the keyboard.
[X]
An EDIUS project is comprised of one or more sequences and a sequence is
comprised of one or more clips. A sequence is built by placing related clips
on the Timeline. There are several ways to place and position clips on the
Timeline.
Captured or imported clips in the Asset Bin are placed on the Timeline to
build EDIUS projects.
To place a clip in the Asset Bin on the Timeline, do the following:
1. Click the track on which you wish to place the clip. See
or button in the Recorder.
Set In Set Out
Clip Placement
Figure 348.
329